Tech Support : 1800-21200-6122 (Toll Free)



SY-AP-1700-AC is an 3x3 MIMO 11ac Wi-Fi standard high power industrial Ceiling Wireless Access Point with Qualcomm Chipset, combined 1750Mbps Wi-Fi speed over 2.4GHz(450Mbps) and 5GHz(1300Mbps), equipped Gigabit WAN & LAN port, make more than 100 end users with faster Ethernet, make them to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidthintensive tasks, widely be used in school, hospital, hotel, office, shipping mall

  1. Comply with IEEE 802.11ac/b/g/n, dual band, 1700Mbps Data Rate
  2. 1 10/100/1000Mbps WAN Port, 1 10/100/1000Mbps LAN Port, faster Ethernet.
  3. 1000mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage, 16M Flash, 128M DDR2 RAM, more user, more stable
  4. Support active IEEE 802.3af POE
  5. Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in GHz)
  6. Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode
  7. With function of build in firewall, IP filter, URL filter and MAC filter
  8. Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment
  9. Support DDNS, VPN pass through, Port forwarding and DMZ host
  10. Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security
Model SY-AP-1700 AC
Chipset Qualcomm QCA9563 + QCA9886 +QCA8334
Standard 802.11ac/b/g/n, MIMO technology
Memory 128MB DDR2 RAM
Flash 16MB
Interface 1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna Build in 5dBi MIMO Antenna
Power consumption 48V PoE<30W
Size 198mm X 28mm
RF Data
Frequency 2.4G:802.11b/g/n
Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
Throughput 1200Mbps
2.4G RF Power 802.11b 11M 28±2dBm 1M 29±2dBm
802.11g 54M 27±2dBm 6M 29±2dBm
802.11n HT20 MCS7 26±2dBm MCS0 28±2dBm
802.11n HT40 MCS7 25±2dBm MCS0 27±2dBm
5G RF Power 802.11a 54M 23±2dBm 6M 25±2dBm
802.11n HT20 MCS7 22±2dBm MCS0 24±2dBm
802.11n HT40 MCS7 21±2dBm MCS0 24±2dBm
802.11ac HT80 MCS9 20±2dBm MCS0 23±2dBm
2.4G Receive Sensitivity 802.11b 11M -85dBm 1M -94dBm
802.11g 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
5G Receive 802.11a 54M -72dBm 6M -90dBm
Sensitivity 802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
802.11ac HT80 MCS9 -58dBm MCS0 -85dBm
EVM 2.4G: 802.11b:≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB
5G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM ±20ppm
Max Users 100+
Firmware Features:
Operation mode Wireless AP, Gateway, WISP, WiFi Repeater
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain
IP and MAC Address Binding
Protocols IPv4
Package Contents 1700Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment Operating Temperature: -30~55 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Management Firmware GUI , Remote Management, WLAN Controller