Tech Support Number : 1800-21200-6122 (Toll Free)

8+2 Gigabit PoE Switch

Overview :

SY-0800P-2T-1S-150W is 10 port 100Mbps with 8 port PoE switch, the ninth port is 10/100/1000Mbps RJ45 uplink port, and the tenth port is gigabit SFP port, auto detection and identification IEEE802.3af/at standard PD device, then carry power to it. Therefore do not worry it will destroy the private standard PoE or Non&PoE equipment. SY-0800P-2T-1S-150W is the best choice for minitype commercial network because it economically use PoE deployment wireless AP and IP camera. SY-0800P-2T-1S-150W can resolve the problem of maintenance tedious, wireless coverage, terminaldevice powered, surveillance project. Maximum save the cost.

Network Port 8 10/100Mbps PoE RJ45 port (port!1~port8)
1 1000Mbps RJ45 uplink port, 1 1000Mbps SFP port
Transmission Rate 100/1000Mbps full Duplex, 10Mbps or 100Mbps half duplex
Interface 100BASE&Tor 1000BASE&TX Ethernet RJ&45 port
Network protocol standard IEEE 802.3ab Gigabit Ethernet standards
IEEE802.3az, EEE Energy efficient Ethernet standard
IEEE 802.3u Fast Ethernet
IEEE 802.3x :Full&duplexEthernet data link layers
IEEE 802.3af/at PoE Power over Ethernet
Performance Bandwidth : 5.6Gbps (non&blocking)
MAC address capacity : 8K
network delay (100 to 100M bps) : maximum 20 μs (using 64 byte packet)
Frames filter and transmission rate:
10M port maximum 14,800pps
100M port maximum 148,809pps
1000M port maximum 148,8095pps
LED indicator Power
POE pin LINK/ACT, PoE ! 1/2(+), 3/6(-)
Power Each port maximum 15.4W
Total power : 96W; 48V@ 2A DC output power
Dimensions Size (LxWxH) : 225mmx121mmx35mm
Weight: 1.35kg
Environment Operating Temperature:0°~40°C
Operating Humidity: 10%~ 90%, Non-condensing
EMC CE Class B
FCC Part 15,Class B
VCCI Class B